IBM RS/6000 7043 43P Series, Руководство пользователя, Страница: 292 / 322

This selection writes all of the settings for the hardware management policies to
the file:
/etc/lpp/diagnostics/data/hmpolicies
Ÿ
Restore Hardware Management Policies
This selection restores all of the settings for the hardware management policies
from the contents of the file:
/etc/lpp/diagnostics/data/hmpolicies
This service aid may be accessed directly from the AIX command line, by entering:
/usr/lpp/diagnostics/bin/uspchrp -a
Save or Restore Service Processor Configuration
Note: Runs on RSPC system units only.
Use this service aid to save or restore the Service Processor Configuration to or from
a file. The Service Processor Configuration includes the Ring Indicator Power On
Configuration.
Ÿ
Save Service Processor Configuration
This selection will write all of the settings for the Ring Indicate Power On and the
Service Processor to the file:
/etc/lpp/diagnostics/data/spconfig
Ÿ
Restore Service Processor Configuration
This selection will restore all of the settings for the Ring Indicate Power On and
the Service Processor from the file:
/etc/lpp/diagnostics/data/spconfig
SCSI Bus Analyzer
This service aid provides a means to diagnose a SCSI Bus problem in a free-lance
mode.
To use this service aid, the user should have an understanding of how a SCSI Bus
works. This service aid should be used when the diagnostics cannot communicate
with anything on the SCSI Bus and cannot isolate the problem. Normally the
procedure for finding a problem on the SCSI Bus with this service aid is to start with
a single device attached, ensure that it is working, then start adding additional
devices and cables to the bus ensuring that each one works. This service aid works
with any valid SCSI Bus configuration.
9-32
7043 43P Series User's Guide