IBM RS/6000 7043 43P Series Скачать руководство пользователя страница 195

Страница: 195 / 322

What to do next?

To install or remove a 5.25-inch drive in bay 3, go to step 13.

To install or remove a 3.5-inch drive in bay 3, go to step 18 on
page 4-95.

To install or remove a drive in bay 4 or 5, go to step 23 on page 4-98.

If you have no more drives to install or remove, go to 20 on page 4-96.

13. If a drive is already installed in bay 3, remove the four screws attaching the drive

to the media drive bracket and remove the drive.

14. Set the SCSI ID of the new drive to an address that does not conflict with drives

already installed.

15. Insert the new drive into bay 3 and attach the drive to the media drive bracket

with four screws.

Chapter 4. Installing and Removing Options

4-93

Содержание RS/6000 7043 43P Series



































































































































































































































































































































Результаты поиска

Содержание RS/6000 7043 43P Series

Отзывы:

IBM RS/6000 7043 43P Series, Руководство пользователя, Страница: 195 / 322

Результаты поиска

Содержание RS/6000 7043 43P Series

Отзывы: