IBM RS/6000 7043 43P Series, Руководство пользователя, Страница: 261 / 322

Chapter 9. Introduction to Tasks and Service Aids
The AIX Diagnostic Package contains programs that are called Tasks. Tasks can be
thought of as "performing a specific function on a resource"; for example, running
diagnostics, or performing a service aid on a resource. This chapter describes the
Tasks available in AIX Diagnostics Version 4.2 and later.
Note: Many of these programs work on all system model architectures. Some
programs are only accessible from Online Diagnostics in Service or
Concurrent mode, others may be accessible only from Standalone
Diagnostics. While still other programs may only be supported on a particular
system architecture, such as CHRP (Common Hardware Reference Platform),
or RSPC (PowerPC Reference Platform). Model 140 and Model 240 use
RSPC architecture. Model 150 uses CHRP architecture.
To perform one of these tasks, use the Task Selection option from the FUNCTION
SELECTION menu.
Once a task is selected, a resource menu may be presented showing all resources
supported by the task.
A fast path method is also available to perform a task by using the diag command
and the -T flag. This means the user does not have to go through most of the
introductory menus just to get to a particular task. Instead, the user is presented
with a list of resources available to support the specified task. The current fast path
tasks are:
Ÿ
Certify – certifies media
Ÿ
Chkspares – checks for the availability of spare sectors
Ÿ
Download – downloads microcode to an adapter or device
Ÿ
Disp_mcode – displays current level of microcode
Ÿ
Format – formats media
Ÿ
Identify – identifies the PCI RAID physical disks
To run these tasks directly from the command line, specify the resource and other
task unique flags. Use the descriptions in this chapter to understand which flags are
needed for a given task.

Copyright IBM Corp. 1996, 1998
9-1