IBM RDX Скачать руководство пользователя | Manualshive

Страница: 94 / 112

background image

The AIX commands,

tar

,

backup

,

restore

,

dd

, and

cpio

can write to the removable disk drive as a raw

device or non-raw device. You might get improved performance by using the device as a raw device.
See the AIX documentation for additional information.

Using the disk drive with the IBM i operating system
The IBM i operating system configures the drive as a removable media drive with a name in the format

RMSxx, for example, RMS01.
The drive and cartridge are used with optical commands and utilities (for example, WRKOPTVOL and

INZOPT), and reports media in the Optical File System (QOPT).
See the IBM i operating system documentation for information about using the IBM i commands:

copy

and

backup

.

Using the disk drive with the Linux operating system
The Linux operating system configures the drive as a disk drive with a name in the format sdx, for

example, sda, sdb, and sdc.
See the Linux documentation for information about using the Linux commands:

copy

and

backup

.

Setting the write-protect switch
The removable disk drives have a red, write-protect tab that is located on the back of the drive. To write-

protect a drive, slide the write-protect tab toward the lock symbol. To disengage write protection, slide

the tab to the unlock symbol.

Using the emergency eject function
To normally eject a removable disk drive, press the eject button, wait for the eject button to stop flashing

green and for the removable disk drive to be ejected. If a drive is stuck and does not eject, the drive and

the dock need service. Complete the following steps to eject the cartridge:

1. Prepare the system for servicing by following the instructions at: “Preparing the system to remove and

replace an internal RDX docking station in the 9009-41A, 9009-42A, or 9223-42H” on page 29 (http://

www.ibm.com/support/knowledgecenter/POWER9/p9ia1/p9ia1_914_924_prereq.htm).

2. Insert a large straightened paper clip (or similar object) into the emergency eject hole.

Note: Do not insert the object in the hole at an angle. Keep the object straight and apply some force to

eject the drive.

3. When the drive has been ejected by the docking station, grasp the exposed sides of the drive and pull

the drive straight out.

4. Prepare the system for operation by following the instructions at: “Preparing the system for operation

after removing and replacing an internal RDX docking station in the 9009-41A, 9009-42A, or

9223-42H” on page 48 (http://www.ibm.com/support/knowledgecenter/POWER9/p9ia1/

p9ia1_914_924_postreq.htm).

Status lights
Find information about the power indicator and drive indicator status lights on the internal RDX docking

station.
Power indicator
The eject button is illuminated by a power indicator light. The following table describes the operation of

the power indicator.

80 Power Systems: RDX docking stations, power cable, and removable disk drives for the 9009-41A, 9009-42A,

or 9223-42H

«
...
92
93
94
95
96
...
»

Содержание RDX

















































































































Отзывы:

Нет отзывов

Похожие инструкции для RDX

Бренд: Cambridge Audio Страницы: 6

Бренд: SENKO Страницы: 11

Бренд: Sandstrom Страницы: 68

Бренд: La Crosse Technology Страницы: 23

Бренд: TFA Страницы: 30

Бренд: Hama Страницы: 60

Бренд: La Crosse Technology Страницы: 9

Бренд: Ambient Weather Страницы: 26

Бренд: Hama Страницы: 15

Бренд: Motion Страницы: 81

Бренд: Raddy Страницы: 51

Бренд: SEABELL Страницы: 7

Бренд: GARNI Страницы: 12

Бренд: V7 Страницы: 132

Бренд: i-tec Страницы: 36

Бренд: Vitek Страницы: 40

Бренд: Vitek Страницы: 44

Бренд: Vitek Страницы: 64

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды