IBM RDX Скачать руководство пользователя | Manualshive

Страница: 43 / 112

background image

Removing and replacing an internal RDX docking station, power cable, and

removable disk drive in the 9009-41A, 9009-42A, or 9223-42H

Find information about removing and replacing an internal RDX docking station, power cable, and

removable disk drive.

About this task
Note: Installing this feature is a customer task. You can complete this task yourself, or contact a service

provider to complete the task for you. You might be charged a fee by the service provider for this service.
If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in

the system. For instructions, see Repairing a part by using the HMC (www.ibm.com/support/

knowledgecenter/POWER9/p9haj/p9haj_hmc_repair.htm).
If your system is not managed by an HMC, complete the steps in the following procedures to remove and

replace an internal RDX docking station and power cable.

Removing and replacing an internal RDX docking station in the 9009-41A, 9009-42A, or

9223-42H

Find information about replacing an internal RDX docking station.

About this task
Note: Installing this feature is a customer task. You can complete this task yourself, or contact a service

provider to complete the task for you. You might be charged a fee by the service provider for this service.
If your system is managed by the Hardware Management Console (HMC), use the HMC to repair a part in

the system. For instructions, see Repairing a part by using the HMC (www.ibm.com/support/

knowledgecenter/POWER9/p9haj/p9haj_hmc_repair.htm).
If your system is not managed by an HMC, complete the steps in the following procedures to remove and

replace an internal RDX docking station.

Preparing the system to remove and replace an internal RDX docking station in the 9009-41A,

9009-42A, or 9223-42H

To prepare the system to remove and replace an internal RDX docking station, complete the steps in this

procedure.

Procedure

1. Identify the part and the system that you are working on. For instructions, see Identifying a

part (www.ibm.com/support/knowledgecenter/POWER9/p9haj/sal.htm).
Use the blue identify LED on the enclosure to locate the system. Ensure that the serial number of the

system matches the serial number to be serviced.

2. Stop the system. For instructions, see Stopping a system (www.ibm.com/support/knowledgecenter/

POWER9/p9haj/crustopsys.htm).

3. Label and disconnect the power cords from the system unit.

See Figure 25 on page 30 or Figure 26 on page 31.
Notes:
• This system might be equipped with two or more power supplies. If the removing and replacing

procedures require the system power to be turned off, ensure that all the power sources to the

system are disconnected.

• The power cord (B) is fastened to the system with hook-and-loop fastener (A). If you are placing the

system in a service position after you disconnect the power cords, ensure that you unstrap the

fastener.

RDX docking stations, removable disk drives, and power cable, for the 9009-41A, 9009-42A, or 9223-42H 29

«
...
41
42
43
44
45
...
»

Содержание RDX

















































































































Отзывы:

Нет отзывов

Похожие инструкции для RDX

Бренд: Rain Bird Страницы: 80

Бренд: Denon Страницы: 117

Wireless Rain Station

Бренд: La Crosse Technology Страницы: 12

Бренд: Accell Страницы: 6

Бренд: LENCO Страницы: 1

Бренд: Oregon Scientific Страницы: 2

Бренд: Oregon Scientific Страницы: 72

Бренд: INSIGHT Страницы: 66

Universal Home Kit

Бренд: Sirius XM RAdio Страницы: 30

Бренд: Sirius XM RAdio Страницы: 30

Бренд: Sirius XM RAdio Страницы: 52

Бренд: Garmin Страницы: 18

Бренд: Garmin Страницы: 22

Бренд: i-Star Страницы: 40

Бренд: Lacrosse Страницы: 46

Бренд: Terdens Страницы: 19

Бренд: La Crosse Technology Страницы: 10

Бренд: Kensington Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды