IBM RDX Скачать руководство пользователя

Страница: 99 / 112

Setting the write-protect switch
The removable disk drives have a red, write-protect tab that is located on the rear of the disk drive. To

write-protect a drive, slide the write-protect tab toward the lock symbol. To disengage write protection,

slide the tab to the unlock symbol.

Using the emergency eject function
To eject a removable disk drive, press the eject button. If a drive is stuck, complete the following steps:

1. Unplug the power cable from the device.
2. Insert a large straightened paper clip (or similar object) into the emergency eject hole.

Attention: Do not insert the object in the hole at an angle. Keep the object straight and apply

some force to eject the drive.

3. When the drive has been ejected by the docking station, grasp the exposed sides of the drive and pull

the drive straight out.

4. Reconnect the power cable for the docking station.
5. Restart your system to reset the docking station.

Status lights
Find information about the power indicator and drive indicator status lights on the external USB

removable disk drive.
Power indicator
The eject button is illuminated by a power indicator light. The following table describes the operation of

the power indicator.

Table 9. Power indicator status and description
Indicator status

Meaning

Description

Off

No power

• FC EUA4: USB cable is not

connected. The power supply

may or may not be connected.

Steady green

Ready

• FC EUA4: USB cable is

connected. The power supply

may or may not be connected.

If the power supply is

connected, the docking station

will work correctly. If the power

supply is not connected, the

docking station will not work

correctly.

Flashing green

Ejecting

Cartridge is ejecting.

Flashing amber

Fault

Docking station has detected a

fault condition with the docking

station.

External RDX removable disk drive indicator
The disk drive has an indicator light that displays the status of the drive. The following table describes the

operation of the drive indicator.

RDX docking stations, removable disk drives, and power cable, for the 9009-41A, 9009-42A, or 9223-42H 85

Содержание RDX

















































































































Результаты поиска

Содержание RDX

Отзывы:

Похожие инструкции для RDX

Бренды по названию

Популярные бренды

IBM RDX, Руководство пользователя

Результаты поиска

Содержание RDX

Отзывы:

Похожие инструкции для RDX

Бренды по названию

Популярные бренды