IBM Proventia Network Enterprise, Руководство пользователя

Страница: 74 / 268

Chapter 5: Introduction to Enterprise Scanner Policies
74
IBM Internet Security Systems
Viewing Asset and Agent Policies
Introduction
In the SiteProtector Console, you can view asset and agent policies together, or you can
view them separately. If you view the policies separately, you can use the views and tabs
in the SiteProtector system to easily move back and forth between asset and agent policies.
Tabs and views
In the SiteProtector Console, you select a group or an agent on the navigation pane, and
information about it appears in a tab on the right pane. The information displayed is
based on the view you select for the tab, such as an
Agent , an Asset , or a Policy view. To
view policies, you must select the Policy view.
Seeing different
views
To see different types of information about a group or an agent, you can do the following:
●
Change the view of a tab.
●
Open multiple tabs with different views for one or more groups.
Changing views To change the view of a tab:
●
In the SiteProtector Console, select a tab, and then select a different view from the
view list.
Note: The view list is located at the top of the Console on the right side.
Opening a new tab
To open a new tab:
●
In the SiteProtector Console, right-click a tab, select New Tab from the pop-up menu,
and then select a view from that pop-up menu.
The new tab appears as the last tab on the right.
Procedure To view Enterprise Scanner policies:
1. In the SiteProtector Console, set up a tab to display policies. (See page 74.)
2. On the left pane, select the asset or agent whose policies you want to view.
3. If you want to see policies from a different repository, select the repository from the
Repository Name list.
4. Select
Network Enterprise Scanner
from the Agent Type list.
5. Select your version of Enterprise Scanner for the agent from the Version list.
Note: The version may apply to the agent whose properties you are defining or to the
agent responsible for scanning the group whose properties you are defining.
Important:
Enterprise Scanner policies may apply to one or more versions, as
indicated in the policy view. If you use multiple agents at different versions that do
not share the same policy, you must define separate policies for each version.
6. Do one of the following:
■
To view all policies, select
All
from the Mode list.
■
To view asset policies, select
Asset
from the Mode list.
■
To view agent policies, select
Agent
from the Mode list.