IBM Proventia Network Enterprise, Руководство пользователя

Страница: 103 / 268

Grouping and Displaying Checks (Assessment Policy)
103 IBM Proventia Network Enterprise Scanner User Guide, Version 1.3
Grouping and Displaying Checks (Assessment Policy)
Introduction
You can use multiple techniques to group and sort the checks in the Checks tab of the
Assessment policy. Grouping and sorting checks makes it easy to enable or disable similar
checks.
Methods
Table 39 describes the methods you can use to group and display checks:
Displaying columns To select columns to display:
1. In the SiteProtector Console, set up a tab to display asset policies. (See page 74.)
2. On the navigation pane, select a group, and then open the Assessment policy for that
group.
3. Do any of the following:
Sorting by a column To sort by a column:
1. In the SiteProtector Console, set up a tab to display asset policies. (See page 74.)
2. On the navigation pane, select a group, and then open the Assessment policy for that
group.
3. Do any of the following:
You can use… To…
column selection choose which information to display.
Note: You can only sort and group by columns that are displayed.
sorting change the order of vulnerabilities based on one column of information.
grouping display vulnerabilities sorted by one or more columns of data.
filtering display vulnerabilities based on varied filters, such as the vulnerability name
or ID, the check name or ID, and regular expressions.
Table 39: Methods for displaying checks
If you want to… Then…
add a single column right-click a column, and then select the column to add from the
pop-up menu.
Note: The column appears at the far right.
remove a single column right-click a column, and then select the column to remove.
Note:
The column is removed.
add multiple columns
click , and then select the check box for each column to add.
remove multiple columns
click , and then clear the check box for each column to remove.
If you want to sort a column… Then…
that is not sorted click the column heading.