IBM PC 300GL Type 6591, Руководство по установке

Страница: 31 / 108

Removing a Memory Module
Attention: The presence of 5 V standby power might result in damage to your
hardware unless you disconnect the power cord from the wall before opening the
computer.
Before you begin
Ÿ
Read “Electrical Safety” on page 4 and “Handling Static-Sensitive Devices”
on page 5.
Ÿ
Turn off the computer and all other connected devices.
Ÿ
Disconnect all cables attached to the computer.
Ÿ
Remove the computer cover (see “Disconnecting Cables and Removing the
Side Cover” on page 6).
Ÿ
Lay the computer on its side.
1
To locate the memory connectors inside your computer, see “Identifying Parts
on the System Board” on page 12.
2
At both ends of the memory module connector, push outward on the retaining
clips until the module is loosened.
Note: Be careful not to push too hard on the retaining clips because the
module may abruptly eject from the connector.
3
Lift the memory module out of the connector.
4
Store the module in a static-protective package.
Chapter 3. Working with Options on the System Board
17