IBM PC 300GL Type 6591, Руководство по установке

Страница: 29 / 108

Installing a Memory Module
Attention: The presence of 5 V standby power might result in damage to your
hardware unless you disconnect the power cord from the wall before opening the
computer.
Before you begin
Ÿ
Read “Electrical Safety” on page 4 and “Handling Static-Sensitive Devices”
on page 5.
Ÿ
Read the instructions that come with the new system memory.
Ÿ
Turn off the computer and all other connected devices.
Ÿ
Disconnect all cables attached to the computer.
Ÿ
Remove the computer cover (see “Disconnecting Cables and Removing the
Side Cover” on page 6).
Ÿ
Lay the computer on its side.
Note: For information on memory configuration, see Table 1 on page 14.
1
To locate the memory connectors inside your computer, see “Identifying Parts
on the System Board” on page 12.
2
Be sure the retaining clips are in the open position, as shown in the second
illustration below. If the retaining clips are perpendicular with the connector,
push outward on them until they click open.
3
Touch the static-protective package containing the memory module to any
unpainted metal surface in the computer, and then remove the module.
Chapter 3. Working with Options on the System Board
15