IBM NetVista N2200, Справочное руководство

Страница: 32 / 62

Table 7. NSBxxxx error codes and text messages (continued)
Error code Error message What you should do
NSB61960 Error - full duplex
protocol error. Manually set the ring speed in the Local
(NVRAM) settings of the setup utility, or
in the IBM thin client Manager program.
NSB61970 Unknown Token Ring
error code. Verify that there are no problems with the
network, and restart the thin client. If this
does not resolve the problem, replace the
thin client logic unit (see “Replacing the
logic unit” on page 27).
Ethernet messages (NSB62xxx)
NSB62500 Line speed automatic
negotiation failed. Verify that you connected the network
cable to the thin client correctly.
NSB62510 No network device found. Replace the thin client logic unit (see
“Replacing the logic unit” on page 27).
Network priority messages (NSB7xxxx)
NSB70500 DHCP, BOOTP, and Local
(NVRAM) network
priority not set. Verify that at least one network priority is
enabled in the setup utility.
DHCP messages (NSB71xxx)
Most errors associated with DHCP are server configuration errors, contact the system
administrator and report your error
NSB71509 DHCP option %d boot
server name %s failed
DNS. Verify that the DHCP server settings are
correct.
NSB71515 Missing DHCP option %d
from server. Verify that the DHCP server settings are
correct.
NSB71525 Missing DHCP client IP
address. Verify that the DHCP server settings are
correct.
NSB71535 Missing DHCP client
directory and file name. Verify that the DHCP server settings are
correct.
NSB71545 DHCP OFFER XID
different than DHCP
DISCOVER XID. Verify that the DHCP server settings are
correct.
NSB71555 DHCP options exceed the
maximum allowable
DHCP option length. Verify that the DHCP server settings are
correct.
NSB71605 DHCP offer from server
%s not valid. Verify that the DHCP server settings are
correct.
BOOTP messages (NSB72xxx)
NSB72505 BOOTP options exceed
the maximum allowable
BOOTP option length. Verify that the BOOTP server settings are
correct.
Network communication messages (NSB8xxxx)
NSB80509 Destination unreachable,
return code
x
%d.
Verify that there are no problems with the
network, and restart the thin client.
NSB80519 Failed ICMP mask
request. Verify that there are no problems with the
network, and restart the thin client.
NSB80529 Failed ICMP router
solicitation. Verify that there are no problems with the
network, and restart the thin client.
22