IBM Netfinity 4500R, Руководство по техническому обслуживанию аппаратной части, Страница: 126 / 192

118
Hardware Maintenance Manual: Netfinity 4500R Type 8656
089-XXX-002
(Failed Optional Microprocessor
test)
1. VRM 2 for Optional Microprocessor 2
2. Optional Microprocessor 2
165-XXX-000 (Failed
Service Processor test)
1. System Board. Before replacing the System Board,
ensure that System Board jumper J45 is not installed
(the default) when the error occurs.
2. Power Backplane
3. Hot-Swap Drive Backplane
180-XXX-000 (Diagnostics LED
failure)
1. Run Diagnostic LED test for the failing LED.
180-XXX-001 (Failed
information LED panel test)
1. Information LED Panel
2. Power Switch
3. Assembly
180-XXX-002 (Failed
Diagnostics LED Panel test)
1. Diagnostics LED Panel
2. Power Switch
3. Assembly
180-XXX-003 (Failed
System Board LED test)
1. System Board
180-XXX-004 (Failed
System Board LED test)
1. System Board
180-XXX-005 (Failed
SCSI Backplane LED test)
1. SCSI Backplane
2. SCSI Backplane Cable
3. System Board
180-XXX-006 (Memory Board
LED test)
1. Memory Board
2. System Board
201-XXX-0NN (Failed
Memory test, see "Memory
Settings" on page 33)
1. DIMM Location slots 1-4 where NN = DIMM
location.
Note: NN=1=DIMM 2
=2=DIMM 1
=3=DIMM 4
=4=DIMM 3
2. System Board
201-XXX-999
(Multiple DIMM
failure, see error text)
1.
See error text for failing DIMMs
2. System Board
202-XXX-001 (Failed
System Cache test)
1. VRM 1
2. Microprocessor 1
202-XXX-002
(Failed
System Cache test)
1.
VRM 2
2. Microprocessor 2
206-XXX-000 (Failed
Diskette Drive test)
1. Cable
2. Diskette Drive
3. System Board
Error Code/Symptom FRU/Action