IBM Netfinity 4500R, Руководство по техническому обслуживанию аппаратной части, Страница: 124 / 192

116
Hardware Maintenance Manual: Netfinity 4500R Type 8656
Diagnostic error codes
Note:
In the following error codes, if XXX is 000 , 195 , or 197
do not
replace a FRU.
The description for these error codes are:
000 The test passed.
195 The Esc key was pressed to abort the test.
197 This is a warning error and may not indicate a hardware failure.
For all error codes, replace/follow the FRU/Action indicated.
TEMP LED on (look at test
cases)
1. Ambient temperature must be within normal operating
specifications. See “Features and specifications” on page
3.
2. Ensure fans are operating correctly.
3. Examine System Error Log.
a. System over recommended temperature
1) Information LED Panel
2) System Board
b. DASD over recommended temperature (DASD LED
also on)
1) Overheating hard drive
2) DASD Backplane
3) System Board
c. System over recommended temperature for CPU X
(where X is CPU 1, 2,) (CPU LED also on)
1) CPU X
d. System Board over recommended temperature
4. If the CPU LED on the diagnostics panel is also on, one of
the microprocessors has caused the error.
Error Code/Symptom FRU/Action
001-XXX-000 (Failed core
tests)
1. System Board
001-XXX-001 (Failed core
tests)
1. System Board
001-250-000 (Failed
System Board ECC)
1. System Board
001-250-001 (Failed
System Board ECC)
1. System Board
005-XXX-000 (Failed
Video test)
1. System Board
011-XXX-000 (Failed
COM1 Serial Port test)
1. System Board
011-XXX-001 (Failed
COM2 Serial Port test)
1. System Board
Diagnostic Panel LED FRU/Action