IBM Netfinity 1000-8477 21Y, Руководство по техническому обслуживанию аппаратной части

Страница: 40 / 268

1. From the Configuration/Setup Utility program menu,
select System Security; then, press Enter.
2. The System Security menu appears.
3. Select Power-On Password; then, press Enter.
4. The Power-On Password menu appears.
5. Select Delete Power-On Password and follow the
instructions on the screen.
Using the Administrator Password menu
:
The administrator password (sometimes called a
supervisor-level password) controls access to some
features of the server, including the Configuration/Setup
Utility program.
To set or change an administrator password:
1. From the Configuration/Setup Utility program menu,
select System Security; then, press Enter.
2. The System Security menu appears.
3. Select Administrator Password; then, press Enter.
4. The Administrator Password menu appears.
5. To set an administrator password, enter the password
in the appropriate data field and press the Down
Arrow (
↓
) key.
You can use any combination of up to seven
characters (A–Z, a–z, and 0–9) for this password.
Keep a record of the password in a safe place.
6. Enter the password again in the appropriate data
field.
7. Define the Power-On Password Changeable by
User field. The choices are:
Yes The power-on password can be changed
without entering the administrator password, if
the administrator password is set.
No The power-on password cannot be changed
unless the administrator password is entered, if
the administrator password is set.
8. To change an administrator password, select Change
Administrator Password from the Administrator
Password menu, and follow the instructions on the
screen.
Attention Administrator Password Users:
If an administrator password is set and then forgotten,
you must complete
one of the following to regain
access to the Configuration/Setup Utility program:
Ÿ
If enhanced security is disabled (default setting),
you must remove the server cover and move the
Clear CMOS Request jumper on the system
board. (See “Erasing lost or forgotten
passwords” on page 43 for further information.)
Ÿ
If enhanced security is enabled, you must replace
the system board.
32
Netfinity Server HMM