IBM N Series, Руководство по настройке и конфигурации

Страница: 22 / 44

(CN1610) #show version
Switch: 1
System Description............................. NetApp CN1610, 1.0.0.4, Linux
2.6.21.7
Machine Type................................... NetApp CN1610
Machine Model.................................. CN1610
Serial Number.................................. 10611100037
Burned In MAC Address.......................... 00:A0:98:4B:AB:DB
Software Version............................... 1.0.0.4
System......................................... Linux 2.6.21.7
Network Processing Device...................... BCM56820_B0
Part Number.................................... 111-00893
Additional Packages............................ FASTPATH QOS
FASTPATH IPv6 Management
12.
Use the
copy active tftp:// tftpserver /image_name
command to upload an
image to the switch. The tftpserver is the name of the TFTP server; image_name
is the name of the image to upload to the switch.
(CN1610) #copy active tftp:// tftpserver / image_name
13. To download the RCF files, IBM recommends using a TFTP server. If the
switch was previously installed and configured, save the current configuration
to a script using the
show running-config
command. The script being created
can have any name but it must end with a
.scr
extension.
This example saves a script named running-config.scr
(CN1610) #show running-config running-config.scr
Config script created successfully.
14. Use the
script list
command to verify that the script is saved.
(CN1610) #script list
Configuration Script Name
Size(Bytes)
-------------------------------- -----------
running-config.scr 6960
1 configuration script(s) found.
2041 Kbytes free.
15. To upload the script to the TFTP server, or to save a copy externally, enter
copy nvram:script running-config.scr tftp:// tftpserver /running-
config.scr running.config.scr
. The last argument, the script being created,
can by any name with any extension.
(CN1610) #copy nvram:script running-config.scr tftp:// tftpserver /running-config.scr
16. To apply the RCF, use the
copy tftp
command to download it to the switch.
The
.scr
extension must be on the file before downloading the script to the
switch. Use the
script list
command to verify that the script is there.
This example downloads the RCF file
CN1610_CS_RCF_v1.0.scr
and verifies
that it is on the switch.
(CN1610) #copy tftp:// tftpserver /CN1610_CS_RCF_v1.0.txt nvram:script CN1610_CS_RCF_v1.0.scr
(CN1610) #script list
Configuration Script Name
Size(Bytes)
-------------------------------- -----------
running-config.scr
6960
CN1610_CS_RCF_v1.0.scr 2147
2 configuration script(s) found.
2041 Kbytes free.
18
IBM System Storage N series: Clustered Data ONTAP Switch Setup and Configuration Guide