IBM N Series, Руководство по настройке и конфигурации

Страница: 30 / 44

cluster::*> network interface revert -vserver node1 -lif clus1
cluster::*> network interface show -role cluster
Logical Status Network Current Current Is
Vserver Interface Admin/Oper Address/Mask Node Port Home
------- ---------- ---------- ------------- -------- ------- ----
node1
clus1 up/up 10.10.0.1/24 node1 e1a true
clus2 up/up 10.10.0.2/24 node1 e2a true
Bringing up the first node is successful if the Is Home column is true for both
cluster interfaces and they show the correct port assignments, in this example
e1a and e2a.
13.
Use
cluster show
to display information about the nodes in a cluster.
This example shows that the node health for
node1
and
node2
in this cluster is
true :
cluster::*> cluster show
Node
Health Eligibility Epsilon
-------------------- ------- ------------ ------------
node1 true true false
node2 true true true
14. If bringing up the first node is successful, then bring up the cluster port and
revert the cluster interface on the remaining nodes by repeating Steps 10 and
11 for the other nodes.
Related information :
IBM N series support website
26
IBM System Storage N series: Clustered Data ONTAP Switch Setup and Configuration Guide