24
Suspend Time Out
This item sets up the timeout (minutes) for
the Suspend mode. The computer will be a
power-saving Suspend mode if the system
has been inactive after the setup time
LAN/Ring Power
On
The system can be turned off with a software
command. If you enable this item, the system
can automatically resume if there is an
incoming call on the Modem. You must use
an ATX power supply in order to use this
feature.
Keyboard Power
On
Wake up key
Wake up
password
If you enable this item, system can
automatically resume by pressing hot keys on
the keyboard or typing in the password. You
must enable the Keyboard Power On jumper
and use an ATX power supply in order to use
this feature.
PowerOn by RTC
Alarm / Date / Hour
/ Minute / Second
The system can be turned off with a software
command. If you enable this item, the system
can automatically resume at a fixed time
based on the system’s RTC (realtime clock).
Use the items below this one to set the date
and time of the wake-up alarm. You must use
an ATX power supply in order to use this
feature.
