IBM IntelliStation M Pro 6225, Руководство по техническому обслуживанию и ремонту

Страница: 107 / 176

Error code/symptom FRU/action
1806
(PCI-to-PCI bridge error occurred.)
1. Remove all adapters and reinstall one at a time, restarting the
server each time, until the failing adapter is determined; then,
replace that adapter.
2. System board.
1807
(xxxxyyyy PCI device unresponsive or
disabled by user, where xxxx=PCI vendor
ID and yyyy=PCI device ID.)
1. Run the Configuration/Setup Utility program and make sure the
device is enabled.
2. Adapter.
3. System board.
1808
(Unsupported PCI device is installed.)
1. Remove all adapters and reinstall one at a time, restarting the
server each time, until the failing adapter is determined; then,
replace that adapter.
2. System board.
1962
(Drive does not contain a valid boot
sector)
1. Verify that a startable operating system is installed.
2. Run diagnostics.
3. Hard disk drive.
4. SCSI adapter, if installed.
5. Cable.
6. System board.
5962
(IDE CD-ROM drive configuration error)
1. Run the Configuration/Setup Utility program.
2. CD-ROM drive.
3. CD-ROM power cable.
4. IDE cable.
5. System board.
6. Battery.
8603
(Pointing-device error)
1. Pointing device
2. System board
00012000
(Machine check architecture error.)
1. Microprocessor
2. System board
00180700
(PCI device not responding.)
1. System board
2. PCI adapter
I9990650
(AC power has been restored)
1. Check cable.
2. Check for interruption of power.
3. Power cable.
Chapter 6. Symptom-to-FRU index
97