IBM IntelliStation E Pro 6836, Руководство пользователя

Страница: 88 / 156

Input/Output connectors
This section provides information about the I/O connectors on the rear of your
computer. These connectors include the following:
v
One mouse
v
One keyboard
v
One parallel
v
Two serial
v
One Ethernet
v
Two USB
v
Line out
v
Line in
v
Mic
v
MIDI
v
One video
v
One Ultra160 SCSI (some models)
Mouse connector
The system board has one mouse connector that supports a mouse or other
pointing device. The mouse connector is located on the rear of your computer. See
“I/O connector locations” on page 71 for its location.
6
4
2
1
3
5
Keyboard connector
There is one keyboard connector on the rear of your computer. See “I/O connector
locations” on page 71 for its location.
Note: If you attach a standard (non-USB) keyboard to the keyboard connector, the
USB connectors and devices will be disabled during the power-on self-test.
6
4
2
1
3
5
Parallel connector
Your computer has one parallel connector. This connector supports three standard
Institute of Electrical and Electronics Engineers (IEEE) 1284 modes of operation:
standard parallel port (SPP), enhanced parallel port (EPP), and extended capability
port (ECP).
Viewing or changing the connector assignments: You can use the built-in
Configuration/Setup Utility program to configure the parallel connector as
bidirectional; that is, so that data can be both read from and written to a device. In
bidirectional mode, the computer supports the ECP and EPP modes.
Complete the following steps to view or change the parallel-connector assignment.
1.
Restart the computer and watch the monitor screen.
2. When the message
Press F1 for Configuration/Setup
appears, press F1.
72
IBM
®
IntelliStation
®
E Pro: User’s Guide IntelliStation E Pro Types 6836, 6846