IBM IntelliStation A Pro, Руководство по установке

Страница: 70 / 106

Diskette drive problems
Symptom Suggested action
The diskette drive activity LED
stays lit, or the computer
bypasses the diskette drive.
v If there is a diskette in the drive, make sure that:
– The diskette drive is enabled in the Configuration/Setup Utility program.
– The diskette is good and not damaged. (Try another diskette if you have
one.)
– The diskette is inserted correctly in the drive.
– The diskette contains the necessary files to start the computer.
– The software program is working correctly.
– The cable is installed correctly (in the correct orientation).
v To prevent diskette drive read/write errors, make sure that the distance between
the monitor and the diskette drive is at least 76 mm (3 in.).
If the problem remains, call for service.
Hard disk drive problems
Symptom Suggested action
Not all drives are recognized by
the hard disk drive diagnostic
test (Fixed Disk test).
1. Remove the first drive that is not recognized and try the hard disk drive
diagnostic test again.
2. If the remaining drives are recognized, replace the drive that you removed with
a new one.
If the problem remains, call for service.
The computer stops responding
during the hard disk drive
diagnostic test.
1. Remove the hard disk drive that was being tested when the computer stopped
responding and try the diagnostic test again.
2. If the hard disk drive diagnostic test runs successfully, replace the drive that
you removed with a new one.
If the problem remains, call for service.
Keyboard, mouse, or pointing-device problems
Symptom Suggested action
All or some keys on the
keyboard do not work.
v
Make sure that the keyboard cable is securely connected to the system and that
the keyboard and mouse cables are not reversed.
v
Make sure that the computer and the monitor are turned on.
v Try using another keyboard.
If the problem remains, call for service.
The mouse or pointing device
does not work.
v
Make sure that the mouse or pointing-device cable is securely connected and
that the keyboard and mouse cables are not reversed.
v Make sure that the mouse device drivers are installed correctly.
v
Make sure that the computer and the monitor are turned on.
v
Try using another mouse or pointing device.
If the problem remains, call for service.
58
IntelliStation A Pro Type 6224: Installation Guide