IBM IntelliStation A Pro, Руководство по установке

Страница: 37 / 106

Installing a drive in bay 3:
Note: Only a 3.5-in. device can be installed in bay 3.
Complete the following steps to install a drive in bay 3:
1. Follow the instructions in “Preinstallation steps” on page 22.
2. Turn off the computer and all attached devices (see “Turning off the computer”
on page 41); then, disconnect all power cords and external cables.
3. Remove the side cover (see “Removing the cover” on page 15).
4. Remove the front bezel (see “Removing the bezel” on page 17).
5. Remove the support bracket (see “Removing and installing the support
bracket” on page 16).
6. Use a screwdriver to pry the filler panel and EMC shield away from the
computer.
Note: If you are installing a drive that contains a laser, review the following
safety precaution.
Chapter 2. Installing the hardware
25