IBM InfoPrint Color 100 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 74

background image

Note:

Before using this information and the product it supports, be sure to read the general information under “Notices” on page v.

First Edition (August 1998)

The following paragraph does not apply to any other country where such provisions are inconsistent with local law.

INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow
disclaimers of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

Order publications through your IBM representative or the IBM branch office serving your locality. Publications are
not stocked at the address given below.

The IBM Printing Systems Company welcomes your comments. A form for reader’s comments is provided at the
back of this publication. If the form has been removed, you may send your comments to the following address:

Information Development
The IBM Printing Systems Company
Department H7FE, Building 003G
P.O. Box 1900
Boulder, CO 80301-9191

If you prefer to send comments electronically, use one of the following methods:

v

Internet: [email protected]

v

Fax: 1-800-524-1519

When you send information to IBM, you grant IBM a nonexclusive right to use or distribute the information in any
way it believes without incurring any obligation to you.

© Copyright International Business Machines Corporation 1998. All rights reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.

Internet

Visit our home page at http://www.printers.ibm.com

«
...
2
3
4
5
6
...
»

Содержание InfoPrint Color 100











































































Отзывы:

Нет отзывов

Похожие инструкции для InfoPrint Color 100

Бренд: Oki Страницы: 24

Бренд: VAF instruments Страницы: 24

Бренд: 3DP Страницы: 12

870 - SuperScript B/W Laser Printer

Бренд: NEC Страницы: 52

SuperScript 1800

Бренд: NEC Страницы: 8

Бренд: Panasonic Страницы: 12

Бренд: Panasonic Страницы: 858

Бренд: olympia electronics Страницы: 4

Бренд: Oki Страницы: 45

Бренд: Intamsys Страницы: 5

Бренд: Oki Страницы: 44

Aficio SP C730DN

Бренд: Ricoh Страницы: 100

Бренд: A&D Страницы: 24

WorkCentre 7830

Бренд: Xerox Страницы: 12

N2125N - DocuPrint B/W Laser Printer

Бренд: Xerox Страницы: 335

7760DX - Phaser Color Laser Printer

Бренд: Xerox Страницы: 4

apeosport 550 I

Бренд: Xerox Страницы: 160

570e - LQ B/W Dot-matrix Printer

Бренд: Epson Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды