IBM InfoPrint Color 100, Введение и руководство по планированию

Страница: 38 / 74

Print Unit Cable Connector – All Other Countries (50 Hz): The print tower power cable does not have
a plug. Provide the appropriate plug and receptacle.
Understand the electrical standards for your country, and use only an approved plug. Your marketing
representative has information on the voltage requirements in your country.
Cooling Unit Connection Requirements
The cooling unit assembly requires a 10 A circuit breaker for 50 Hz units and a 15 A circuit breaker for 60
Hz units. Ensure that the wall receptacle connector isolates the cooling unit from the power source.
Location Cooling Unit Power
Europe 230 V ac, 50 Hz, single phase
United States, Canada
208-240 V ac, 60 Hz, single phase
Japan 50 Hz unit: may attach to 220 V, 50 Hz, single phase, 60 Hz unit: may attach to 220 V, 60
Hz, single phase - or may connect to secondary of transformer provided for the printer.
Cooling Unit Connector
The 60 Hz cooling units have a NEMA 6-15P plug. This plug fits 208–240 volt grounded wall outlets
commonly available in the United States and Canada.
The 50 Hz cooling units have a standard CEE7 VII plug. This plug fits 230 volt grounded outlets commonly
available in Europe. If these plugs do not match the available outlet, install the appropriate outlet. For
power and phase requirements, refer to “Cooling Unit Connection Requirements”.
RIP Controller Connection Requirements
The RIP controller requires a separate power supply and receptacle with a 10 A circuit breaker. Ensure
that the wall receptacle connector isolates the RIP controller from the power source. The RIP Controller
requires the following electrical power connections:
Location RIP Controller Power
Europe 220 V ac, 50 Hz, single phase
United States, Canada
120 V ac, 60 Hz, single phase
Japan 200/210 V ac, 50/60 Hz, single phase
The appropriate power cord will be supplied for your country.
Additional Connection Requirements
Densitometer Charger Cable – World Trade
The densitometer charger has a standard CEE7 XVI (2) Euro plug and fits 200–260 V, 400 mA outlets
commonly available in Europe. If these plugs do not match the available outlet, then install the appropriate
adapter.
Service Modem
The InfoPrint Color 100 comes with a modem which can be used to facilitate some service functions. (See
“Service Modem” on page 32 for a complete description.) If you wish to have this capability, an analog
24
IBM InfoPrint Color 100 Introduction and Planning Guide