IBM Infoprint 1120 Скачать руководство пользователя

Страница: 67 / 212

Argecy Computer Corporation 248-324-1800

–

If you do not see either end of the print material, see

Between three trays

to remove the

jam.

Slide the paper tray back into the support unit.

Between three trays

This type of jam may occur if you are using legal-size paper in the trays or if you have a 250-sheet
drawer installed with other optional drawers.

Pull the paper tray out of the support unit. If only a short piece of the paper is visible, do not
pull down to remove the paper.

Gently slide the paper tray back into the support unit.

Pull the paper tray out of the support unit that is above the tray you just closed.

Pull the paper either up or down. If it does not pull easily one way, try the other way.

Slide the paper tray back into the support unit.

Note:

With this type of jam, there may be another jam under the print cartridge. Remove
the print cartridge and any jammed paper, and then reinstall the print cartridge.
See

Replacing the print cartridge

for more information.

Содержание Infoprint 1120





















































































































































































































Результаты поиска

Содержание Infoprint 1120

Отзывы:

Похожие инструкции для Infoprint 1120

Бренды по названию

Популярные бренды

IBM Infoprint 1120, Справочник пользователя

Результаты поиска

Содержание Infoprint 1120

Отзывы:

Похожие инструкции для Infoprint 1120

Бренды по названию

Популярные бренды