IBM Infoprint 1120 Скачать руководство пользователя страница 101

Страница: 101 / 212

Argecy Computer Corporation 248-324-1800

Queuing Jobs

What this message means:

The printer is sending one or more held jobs to print.

What you can do:

Wait for the message to clear.

Ready

What this message means:

The printer is ready to receive and process print jobs.

What you can do:

Send a job to print.

Ready Hex

What this message means:

The printer is in Hex Trace mode and is ready to receive and process print jobs.

What you can do:

•

Send a job to print. All data sent to the printer is printed in hexadecimal and character
representation. Control strings are printed, not executed.

•

Turn the printer off and then on to exit Hex Trace mode and return to Ready status.

•

Reset the printer.

Содержание Infoprint 1120





















































































































































































































Результаты поиска

Содержание Infoprint 1120

Отзывы:

Бренды по названию

Популярные бренды

IBM Infoprint 1120, Справочник пользователя

Результаты поиска

Содержание Infoprint 1120

Отзывы:

Бренды по названию

Популярные бренды