IBM HS40 - BladeCenter - 8839, Руководство по установке

Страница: 14 / 64

The following illustration shows SOL settings for management modules other than
an advanced management module.
The following illustration shows SOL settings for an advanced management
module.
Note: For the advanced management module, the SOL VLAN ID and the BSMP
IP address range are set on the Blade Tasks
→
Configuration page (see the
Advanced Management Module User's Guide for information).
The SOL settings and recommended values are:
v Serial Over Lan: Enabled
Use this field to enable or disable SOL globally for the BladeCenter unit. If SOL
is enabled globally and if SOL is enabled for a blade server, an SOL session can
be established with that blade server. If SOL is disabled globally, no SOL
sessions can be established with any blade servers in the BladeCenter unit.
v
SOL VLAN ID (management modules other than the advanced management
module)
8
BladeCenter: Serial over LAN Setup Guide