IBM HS22V BLADECENTER - X5670 FOR SPEC CPU2006 страница 73 Скачать руководство пользователя | Manualshive

Страница: 73 / 80

background image

73

10.1.2. FlashCopy and VolumeCopy support statements

The use of DS4000 or DS5000 FlashCopy and VolumeCopy with IBM i as a client of VIOS is
supported as outlined below.

Please note

that to implement and use this solution,

multiple

manual steps on the DS4000 or DS5000 storage subsystem, in VIOS and in IBM i are
required

. Currently, no toolkit exists that automates this solution and it is not part of IBM

PowerHA for IBM i. The components of the solution – DS4000 or DS5000
FlashCopy/VolumeCopy, VIOS and IBM i – must be managed separately and require the
corresponding skill set. Note also that support for this solution will be provided by multiple IBM
support organizations and not solely by the IBM i Support Center.

Support statements:

•

DS4000 or DS5000 FlashCopy and VolumeCopy are supported by IBM as a client of
VIOS on both IBM Power servers and IBM Power blades

•

Full-system FlashCopy and VolumeCopy when the production IBM i logical partition
(LPAR) is powered off are supported

•

Full-system FlashCopy and VolumeCopy when the production IBM i LPAR is in restricted
state are supported

•

The DS4000 or DS5000 'disable' and 're-create' functions with full-system FlashCopy and
VolumeCopy when the production IBM i LPAR is powered off or is in restricted state are
supported

•

Full-system FlashCopy and VolumeCopy of the production IBM i logical partition (LPAR)
after only using the IBM i 6.1 memory flush to disk (quiesce) function are

not supported

•

Full-system FlashCopy and VolumeCopy when the production IBM i LPAR is running are

not supported

•

FlashCopy and VolumeCopy of Independent Auxiliary Storage Pools (IASPs) are

not

supported

•

Having the production and backup IBM i LPAR under the same VIOS is

not supported

For assistance with using DS4000 or DS5000 FlashCopy and VolumeCopy with IBM i, contact
IBM Lab Services using this Web site:
http://www.ibm.com/systems/services/labservices/contact.html.

10.2 Enhanced Remote Mirroring (ERM)

10.2.1. Test scenario

The following diagram shows the test environment used for ERM:

«
...
71
72
73
74
75
...
»

Содержание HS22V BLADECENTER - X5670 FOR SPEC CPU2006

















































































Отзывы:

Нет отзывов

Похожие инструкции для HS22V BLADECENTER - X5670 FOR SPEC CPU2006

Бренд: Native Instruments Страницы: 74

Бренд: Yamaha Страницы: 89

ENTERPRISE SOLUTION ERASING FI

Бренд: Blackberry Страницы: 10

BlackArmor WS 110

Бренд: Seagate Страницы: 2

SUPERSTACK II HUB 10 24-PORT TP

Бренд: 3Com Страницы: 8

Бренд: 3Com Страницы: 8

Internet Gatekeeper

Бренд: F-SECURE Страницы: 414

Бренд: FARONICS Страницы: 4

WINSELECT STANDARD

Бренд: FARONICS Страницы: 36

Бренд: Ulead Страницы: 60

PARTNER ACS R5.0

Бренд: Avaya Страницы: 32

CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Бренд: Red Hat Страницы: 110

Бренд: RGB Spectrum Страницы: 158

ANTI-VIRUS - FOR MICROSOFT EXCHANGE

Бренд: F-SECURE Страницы: 115

Бренд: SkyLink Страницы: 6

Application Update

Бренд: TomTom Страницы: 11

Бренд: Xerox Страницы: 60

Бренд: MACROMEDIA Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды