manualshive.com logo in svg

IBM HS22V BLADECENTER - X5670 FOR SPEC CPU2006, Спецификация

Поделиться
Скачать
IBM HS22V BLADECENTER - X5670 FOR SPEC CPU2006 Скачать руководство пользователя страница 6

 

  

6 

The I/O options and chassis support  for IBM i for the PS700 are the same as those for the 
PS701. 
 

1.1.3. IBM BladeCenter PS702 Express 
 

The IBM BladeCenter PS702 Express is a double-wide blade server based on the POWER7™ 
processor.  The PS702 consists of the PS701 main blade unit and a Symmetric Multiprocessing 
(SMP) expansion unit, which occupies an adjacent blade bay in an IBM BladeCenter.  The PS702 
has the following combined hardware characteristics: 
 

•

 

2 sockets and 16 POWER7™ cores operating at 3 GHz 

•

 

4 MB of L3 cache per core (total of 32 MB per socket) and 256KB of L2 cache per 
core 

•

 

Up to 32 DDR3 memory DIMMs for a maximum of 256 GB 

•

 

4 embedded 1Gb Ethernet ports 

•

 

Onboard SAS and USB controllers, EnergyScale™ power management and FSP-1 
service processor on the main blade unit 

•

 

Up to 2 SAS onboard drives 

•

 

Up to 2 CFFh and 2 CIOv I/O expansion adapters 

 
For IBM i, the PS702 is supported in BladeCenter H and BladeCenter S. 
 

Note that the I/O adapter options for IBM i on PS700, PS701 and PS702 are the same as 
those on JS23 and JS43. 

 

1.1.4. IBM BladeCenter JS23 Express 
 

The IBM BladeCenter JS23 Express is a single-wide blade server based on the POWER6™ 
processor.  The JS23 contains 2 sockets and 4 POWER6™ cores, which use IBM’s enhanced 
65-nm lithography and operate at 4.2 GHz.  The JS23 also includes 32 MB of shared L3 cache 
per socket and 4 MB of dedicated L2 cache per core.  Up to 8 DDR2 memory DIMMs are 
supported for a maximum of 64 GB.  The blade server includes 2 embedded 1Gb Ethernet ports, 
onboard SAS and USB controllers, EnergyScale™ power management and an FSP-1 service 
processor.  A maximum of one onboard Serial-attached SCSI (SAS) or Solid State Disk (SSD) 
drive is supported.  The JS23 supports 2 types of I/O expansion adapters:  Combination Form 
Factor – Horizontal (CFFh) and the new Combination I/O Form Factor – Vertical (CIOv).  For IBM 
i, the JS23 is supported in IBM BladeCenter H and BladeCenter S.  The following picture shows 
the JS23, identifying the major components: 

 
 

Содержание HS22V BLADECENTER - X5670 FOR SPEC CPU2006

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды