manualshive.com logo in svg

IBM HS22V BLADECENTER - X5670 FOR SPEC CPU2006, Спецификация

Поделиться
Скачать
IBM HS22V BLADECENTER - X5670 FOR SPEC CPU2006 Скачать руководство пользователя страница 69

 

  

69 

The following table shows the available feature codes for pre-defined SAS zone configurations for 
BladeCenter S: 
 

 

 

* Not valid with 1 DSM   

 

 

 

** Not valid with JS22, JS23 or PS701 and 1 DSM 

 

9.2.2. Requirements for RSSM 

 
The following features are required in an IBM i preinstall configuration on BladeCenter S with 
RSSMs: 
 

•

 

FC 8250 (SAS Expansion Card (CFFv) for IBM BladeCenter) on JS12 or JS22 

•

 

FC 8246 (SAS Passthrough Expansion Card (CIOv) for IBM BladeCenter) on JS23, JS43, 
PS700, PS701 or PS702 

•

 

All drives in the BladeCenter S must be the same size if they are part of an IBM i 
preinstall order 

•

 

Three BladeCenter S drives 

per Power blade

 with preinstall selected 

•

 

FC 5005 (Software Preinstall), FC 8146 (VIOS Preinstall) and FC 8141 (IBM i Preinstall) 
must be ordered 

o

  In the case of i Express Edition for BladeCenter S with RSSM, FC 8141 is not 

required.  All i Express Edition orders with FC 0776 will get IBM i preinstalled 

 
 
 

9.3. Installation steps that must be performed by the implementing party 
 

While the IBM i preinstall capability greatly simplifies the installation of IBM i in a BladeCenter S 
environment, 

some manual steps must be performed

 by the party implementing this solution: 

 

•

 

Install the BladeCenter S hardware, as discussed in section 3.1 of this document 

•

 

Configure and update the AMM, as discussed in sections 3.2, 3.3, 3.4 and 3.9 

•

 

Configure and update any I/O modules and DSMs, as discussed in sections 3.6 – 
3.12 

•

 

Create a physical network connection to I/O module bay 1 of the BladeCenter S, to 
allow connection of the LAN console connection for the IBM i partition created and 
installed by IBM manufacturing.   

•

 

Install the Operations Console (LAN) component of the System i Access for Windows 
software on a PC connected to the network on which the BladeCenter S resides.  
See section 1.5.  

 

•

 

Configure the LAN console connection on the PC, as discussed in section 5.11.   

Содержание HS22V BLADECENTER - X5670 FOR SPEC CPU2006

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды