IBM High Performance Storage System HPSS, Руководство по установке, Страница: 61 / 311

•
1 GB RAM
3.3.2.2.3. Solaris Requirements
Each Solaris Mover node must have the following prerequisites:
•
Solaris UltraSPARC based processor
•
Solaris 8+ (32-bit or 64-bit)
•
C compiler: Forte Developer 7 C 5.4 2002/03/09 (if planning to recompile Mover code)
3.3.2.2.4. IRIX Requirements
Each IRIX Mover node must have the following prerequisites:
•
SGI machine
•
IRIX 6.5 (with latest/recommended patch set)
•
C compiler (if planning to recompile Mover code)
3.3.2.3. HPSS Client Nodes
This section describes the prerequisite requirements for running HPSS clients.
3.3.2.3.1. SSM Client Requirements
The client node where the SSM hpssgui and hpssadm applications run must meet the following
requirements:
•
Supported platforms: AIX , Linux, Windows
•
J2RE or J2SE 1.4.2 for the appropriate platforms
3.3.2.3.2. Client API Requirements
The client node where HPSS Client API applications run must meet the following requirements:
•
Supported platforms. Refer to Table 1: HPSS Client Interface and Mover Platforms for
complete list.
•
C compiler (if planning to recompile client application)
3.3.2.3.3. FTP/PFTP Client Requirements
The client node where HPSS FTP and PFTP run must meet the following requirements:
•
Supported platforms. Refer to Table 1: HPSS Client Interface and Mover Platforms for
complete list.
•
C and yacc compilers (if planning to recompile client code)
3.3.2.4. HPSS HDM Nodes (Linux only)
•
SUSE Linux Enterprise Server (SLES) version 9 Service Pack 2 or greater
•
MIT Kerberos 1.3.5
•
dmapi-2.2.1-0.2 or higher
HPSS Installation Guide July 2008
Release 6.2 (Revision 2.0) 61