IBM High Performance Storage System HPSS, Руководство по установке

Страница: 305 / 311

* [ stdout | syslog ]
* HPSS_CONFIG_CAT_NAME - HPSS config message catalog full pathname
* HPSS_INFRA_LOG_TYPES - Default types of infrastructure messages
* to be logged
* HPSS_INFRA_LOG_CONF - The infrastructure logging configuration
file
* HPSS_MASTER_CAT_NAME - HPSS master message catalog full pathname
*
**************************************************************************
*
*/
{ "HPSSLOG_SHMKEY", "2801", NULL},
{ "HPSSLOG_SHMID", NULL, NULL},
{ "HPSSLOG_HOSTNAME", "${HPSS_HOST}", NULL},
{ "HPSSLOGGER", "", NULL},
{ "HPSSLOG", "", NULL},
{ "HPSS_CONFIG_CAT_NAME", "${HPSS_PATH_MSG}/config.cat",
NULL},
{ "HPSS_INFRA_LOG_TYPES", "CS_ALARM:CS_EVENT", NULL},
{ "HPSS_INFRA_LOG_CONF", "${HPSS_PATH_TMP}/$$.log.conf",
NULL},
{ "HPSS_MASTER_CAT_NAME", "${HPSS_PATH_MSG}/hpss.cat",
NULL},
/*
**************************************************************************
*
* FTPD Specific
*
* HPSS_PATH_FTP - FTP daemon ./etc pathname
* HPSS_FTPD_CONTROL_PORT - FTP daemon control default port ID
* HPSS_FTP_RESERVED - FTP reserved port IDs
* HPSS_FTP_BLOCK_SIZE - FTP block size
**************************************************************************
*
*/
{ "HPSS_PATH_FTP", "${HPSS_PATH_VAR}/ftp", NULL},
{ "HPSS_FTPD_CONTROL_PORT", "4021", NULL},
{ "HPSS_FTP_RESERVED", "1025", NULL},
{ "HPSS_FTP_BLOCK_SIZE", "4", NULL},
/*
**************************************************************************
*
* Security Registry & Service Location Specific
*
* HPSS_SEC_REALM_NAME - Default security realm name
* HPSS_SITE_NAME - Default HPSS site name
* IEEE_802_FILE - Location of file containing the MAC
address
* HPSS_AUTH_SERVICE_CONF - File for valid authentication mechanisms
* HPSS_AUTHZ_SERVICE_CONF - File for valid authorization mechanisms
* HPSS_SEC_EP_CONF - File containing the local endpoints
* HPSS_KRB5_AUTHN_MECH - Kerberos authentication mechanism
* HPSS_KRB5_KEYTAB_FILE - The path for the kerberos keytab file
* HPSS_UNIX_AUTHN_MECH - HPSS Unix authentication mechanism
* HPSS_UNIX_KEYTAB_FILE - The path for the HPSS Unix keytab file
* HPSS_PRIMARY_AUTHN_MECH - The primary authentication mechanism to
use
* HPSS_CLIENT_AUTHN_MECH - The client authentication method to use
* HPSS_SEC_SITE_CONF - File containing connect information for
* local security registry and location
* service
* HPSS_AUTHN_TYPES - Supported authentication types
HPSS Installation Guide July 2008
Release 6.2 (Revision 2.0) 305