IBM High Performance Storage System HPSS, Руководство по установке

Страница: 270 / 311

Section (CMPD) <Destination IP Address> = {
E.g. 100.101.102.0 = {
Optional SubStanza specifying a dotted decimal address of the
destination interface.
Only one address is allowed; however, networks and sub-networks may
be chosen by appropriate specification of the NetMask.
May contain: “Default = {“ ( Reserved Specification) for inclusion of
entries not explicitly specified.
Must be terminated with a matching “}”
SubSection NetMask = <value>
Value: Viable netmask as IP Address
E.g. NetMask = 255.255.255.0
Optional parameter to specify the dotted decimal net mask to apply to the
Destination IP Address to determine whether the entry applies
SubSection RFC1323 = <value>
Values: 0, 1
E.g. RFC1323 = 1
Optional parameter to specify whether the RFC1323 option should be
disabled (0) or enabled (any other value)
SubSection SendSpace = <value>
Values: Size specified as decimal value or "xMB" format
E.g. SendSpace = 256KB
Optional parameter to specify the value to be used for the socket sending
buffer space.
SubSection RecvSpace = <value>
Values: Size specified as decimal value or "xMB" format
E.g. RecvSpace = 256KB
Optional parameter to specify the value to be used for the socket receive
buffer space.
SubSection WriteSize = <value>
Values: Size specified as decimal value or "xMB" format
E.g. WriteSize = 1MB
Optional parameter used to set the size to be used for each individual
write request to the network
HPSS Installation Guide July 2008
Release 6.2 (Revision 2.0) 270