IBM High Performance Storage System HPSS, Руководство по установке

Страница: 290 / 311

# Parallel Multinode Transfer Agent (PMTA) Section
Transfer Agent = {
# The (optional) NodeSet File contains named sets of
# Nodes that can be referred to via the "SET:setname"
# notation.
Nodeset File = /var/hpss/etc/ta/nodeset.conf
# The (optional) Node Affinity file is used to specify
# groups of nodes are able to communicate in a
# network whose topology does not support full interconnection
Node Affinity File = /var/hpss/etc/ta/node_affinity.conf
# The Shared Filesystem file is used to specify the
# list of shared filesystem mount points and associated
# nodes or NodeSets
Shared FS File = /var/hpss/etc/ta/shared_fs.conf
# The Agent file contains the list of client hosts and
# the list of nodes that can be used as Agents from each client
Agent File = /var/hpss/etc/ta/agent.conf
# The Disabled Node file is used to disable selection of
# nodes that are temporarily unavailable. It overrides
# entries in the Agent file
Disabled Node File = /var/hpss/etc/ta/disabled_node.conf
# The Audit Logfile contains an audit trail of all PMTA activity
Audit Logfile = /tmp/pmta_Audit.log
# The Debug Logfile contains debugging output. It can
# be overridden by environment variable settings.
Debug Logfile = /tmp/pmta_Debug.log
# The SYSLOG Facility parameter controls logging to syslog. Legal
# values are "off" or "LOCALn" where n=0-7.
SYSLOG Facility = off
# The optional "Allow Uid Mapping" setting defines whether the same
user
# can have different UIDs on different machines within the site.
# The default value is NO
Allow Uid Mapping = NO
# The optional "Uid Mapfile" setting is the name of the
# mapping file when "Allow Uid Mapping" is set to "YES"
Uid Mapfile = /var/hpss/etc/ta/uid_mapfile
# The optional "Allow Gid Mapping" settng defines whether the same
group
# can have different GIDs on different machines within the site.
# The default value is NO
Allow Gid Mapping = NO
# The optional "Gid Mapfile" setting is the name of the mapping
# file used when "Allow Gid Mapping" is set to "YES"
Gid Mapfile = /var/hpss/etc/ta/gid_mapfile
}
# end of Transfer Agent section
HPSS Installation Guide July 2008
Release 6.2 (Revision 2.0) 290