IBM eserver xSeries 350 Скачать руководство пользователя страница 44

 32

IBM xSeries 350: Installation Guide

 

 

During the warranty period IBM or your reseller, if approved by IBM to provide 
warranty service, will provide repair and exchange service for the Machine, without 
charge, under the type of service designated for the Machine and will manage and 
install engineering changes that apply to the Machine.

If a Machine does not function as warranted during the warranty period, and IBM or 
your reseller are unable to either 1) make it do so or 2) replace it with one that is at 
least functionally equivalent, you may return it to your place of purchase and your 
money will be refunded. The replacement may not be new, but will be in good 
working order.

Extent of Warranty
The warranty does not cover the repair or exchange of a Machine resulting from 
misuse, accident, modification, unsuitable physical or operating environment, 
improper maintenance by you, or failure caused by a product for which IBM is not 
responsible. The warranty is voided by removal or alteration of Machine or parts 
identification labels.

THESE WARRANTIES ARE YOUR EXCLUSIVE WARRANTIES AND REPLACE 
ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, 
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OR 
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 
PURPOSE. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND 
YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM JURISDICTION 
TO JURISDICTION.  SOME JURISDICTIONS DO NOT ALLOW THE 
EXCLUSION OR LIMITATION OF EXPRESS OR IMPLIED WARRANTIES, SO 
THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.  IN 
THAT EVENT, SUCH WARRANTIES ARE LIMITED IN DURATION TO THE 
WARRANTY PERIOD.  NO WARRANTIES APPLY AFTER THAT PERIOD.

Items Not Covered by Warranty
IBM does not warrant uninterrupted or error-free operation of a Machine.

Unless specified otherwise, IBM provides non-IBM machines WITHOUT 
WARRANTIES OF ANY KIND.

Any technical or other support provided for a Machine under warranty, such as 
assistance via telephone with "how-to" questions and those regarding Machine set-up 
and installation, will be provided WITHOUT WARRANTIES OF ANY KIND.

Warranty Service
To obtain warranty service for the Machine, contact your reseller or IBM. In the 
United States, call IBM at 1-800-772-2227.  In Canada, call IBM at 1-800-565-3344. You 
may be required to present proof of purchase.

IBM or your reseller provides certain types of repair and exchange service, either at 
your location or at a service center, to keep Machines in, or restore them to, 
conformance with their Specifications. IBM or your reseller will inform you of the 
available types of service for a Machine based on its country of installation.  IBM may 
repair the failing Machine or exchange it at its discretion.

When warranty service involves the exchange of a Machine or part, the item IBM or 
your reseller replaces becomes its property and the replacement becomes yours.  You 
represent that all removed items are genuine and unaltered.  The replacement may 
not be new, but will be in good working order and at least functionally equivalent to 
the item replaced.  The replacement assumes the warranty service status of the 
replaced item.

Any feature, conversion, or upgrade IBM or your reseller services must be installed on 
a Machine which is 1) for certain Machines, the designated, serial-numbered Machine 
and 2) at an engineering-change level compatible with the feature, conversion, or 

Содержание eserver xSeries 350































































Отзывы: