IBM eserver xSeries 350, Руководство по установке, Страница: 12 / 62

x
IBM xSeries 350: Installation Guide
Handling static-sensitive devices
Attention: Static electricity can damage electronic devices and your system. To
avoid damage, keep static-sensitive devices in their static protective bags until you are
ready to install them.
To reduce the possibility of electrostatic discharge, observe the following precautions:
• Limit your movement. Movement can cause static electricity to build up around
you.
• Handle the device carefully, holding it by its edges or its frame.
• Do not touch solder joints, pins, or exposed printed circuitry.
• Do not leave the device where others can handle and possibly damage the device.
• While the device is still in its anti-static bag, touch it lo an unpainted metal part of
the system unit for at least two seconds. (This drains static electricity from the
package and from your body.)
• Remove the device from its package and install it directly into your system unit
without setting it down. If it is necessary to set the device down, place it on its
static-protective bag. (If your device is an adapter, place it component side up.)
Do not place the device on your system unit cover or on a metal table.
• Take additional care when handling devices during cold weather because heating
reduces indoor humidity and increases static electricity.