IBM eserver xSeries 350, Руководство по установке, Страница: 21 / 62

Chapter 2. Installing options
9
7. Connect the cable to an internal channel connector on the ServeRAID adapter.
Installing memory options
Before you install memory, review the following:
• The DIMM options available for your server are 128 MB, 256 MB, 512 MB, and 1
GB. Your server supports a maximum of 16 GB of system memory.
• When 4 GB of memory is installed in the server, the amount of usable memory
will be reduced depending on the system configuration. A certain amount of
memory must be reserved below 4 GB for system resources. The usable memory
is reduced again when 16 GB of memory is installed. The BIOS will display only
the amount of memory available to the operating system.
• Your server comes with a minimum of 512 MB of memory installed in bank 1.
When you install additional DIMMs, be sure to follow the DIMM installation
order in Table 2.
Table 2. DIMM installation order.
Set of 4 DIMMs Install DIMMs in these connectors:
Bank 1 (shipped as standard) J1, J5, J9, J13
Bank 2 J2, J6, J10, J14
Bank 3 J3,J 7,J 11,J 15
Bank 4 J4, J8, J12, J16
ServeRAID adapter
CPU
Memory
Fan
A B C
1 2 3
DASD
NMI
SP Bus
Event Log
Non Red
Over Spec
Temp
PCI
Bus
Power
Supply