IBM Enterprise Server S80, Руководство пользователя

Страница: 239 / 282

If AT&F, configuration file modem_f.cfg is recommended. If AT&Fn, configuration
file modem_f0.cfg or modem_f1.cfg is recommended, depending on which
provides the hardware flow control profile.
7. Selection of the configuration file is complete. If you find it necessary to adjust any
of these configuration files, do so with reference to the documentation that came
with your modem. It is recommended you select settings that enable hardware flow
control and respond to DTR.
Note: Some older modems do not respond to the commands
X0
or
&R1
. You should
edit these commands out of the modem configuration file if yours is such a
modem. See your modem documentation for more information.
Examples For Using the Generic Sample Modem Configuration Files
Modem Setup Z Setup Z0
(Rare)
Setup F Setup F0 Setup F1
AT&T DataPort 2001 ** X
Bocamodem 1440E X
Hayes Smart Modem
300
X
IBM 5841 X
IBM 5843 X
IBM 7851 X
IBM 7852-10 X
IBM 7855 X
USRobotics 36.6K
Sportster
X
Zoom V.32 X
Note: ** Ring interrupt only on first ring.
Customizing the Modem Configuration Files
You can create your own modem configuration file(s) or modify the samples provided.
After you customize your modem configuration files, you
must access them through the
Configure Remote Maintenance Policy Service Aid rather than from the SP menus.
Note: If you have already set up your serial ports, line speeds, authorizations, and
telephone numbers from the SP menus, specify your customized modem
configuration files from the service aid.
If you have not already set up your serial ports, line speeds, authorizations, and
telephone numbers from the SP menus, you can set them up with the service aids
while you specify your customized modem configuration files.
Appendix G. Modem Configurations
221