IBM Enterprise Server S80, Руководство пользователя

Страница: 191 / 282

Chapter 7. Using the System Verification Procedure
The system verification procedure is used to check the system for correct operation.
If you are analyzing a hardware problem, see Chapter 8. Hardware Problem
Determination.
Step 1. Considerations before Running ThisProcedure
Notes:
1. If this system unit is directly attached to another system unit or attached to a
network, make sure that communications with the other system unit are stopped.
2. This procedure requires use of all of the system resources. No other activity can be
running on the system while you are doing this procedure.
v
This procedure requires a display connected to the video port or an ASCII terminal
attached to the S1 port.
v
Before starting this procedure, stop all programs and the operating system.
v
This procedure runs the Online Diagnostics in Service mode or Standalone
Diagnostics. If the Online Diagnostics are installed, they should be run. See the
operator manual for your type of ASCII terminal to find the key sequences you need
to respond to the diagnostics.
v
If you need more information about diagnostics, see Chapter 5. Using the Online and
Standalone Diagnostics.
v
If a console display is not selected, the diagnostics stop. The instructions for
selecting a console display are displayed on all of the graphic displays and any
terminal attached to the S1 port. Follow the instructions to select a console display.
v
Go to Step 2.
173