IBM Enterprise Server S80, Руководство пользователя

Страница: 135 / 282

Maintenance Mode
Maintenance mode runs the Online Diagnostics using the customer’s version of the AIX
operating system. This mode requires that all activity on the AIX operating system be
stopped so the Online Diagnostics have most of the resources available to check. All of
the system resources except the SCSI adapters, memory, processor, and the disk drive
used for paging can be checked.
Error log analysis is done in maintenance mode when you select the Problem
Determination option on the DIAGNOSTIC MODE SELECTION menu.
The
shutdown -m
command is used to stop all activity on the AIX operating system and
put the AIX operating system into maintenance mode. Then the
diag
command is used
to invoke the diagnostic controller so you can run the diagnostics. After the diagnostic
controller is loaded, follow the normal diagnostic instructions.
Running the Online Diagnostics in Maintenance Mode
To run the Online Diagnostics in maintenance mode, you must be logged on to the
customer’s version of the AIX operating system as
root or superuser (su) and use the
shutdown -m
and
diag
commands. Use the following steps to run the Online Diagnostics
in maintenance mode:
1. Stop all programs except the AIX operating system (get help from the system
operator if needed).
2. Log onto the AIX operating system as root or superuser (su).
3. Enter the
shutdown -m
command.
4. When a message indicates the system is in maintenance mode, enter the
diag
command.
Note: It may be necessary to set TERM type again.
5. When DIAGNOSTIC OPERATING INSTRUCTIONS screen is displayed, follow the
displayed instructions to check out the desired resources.
6. When testing is complete, use the F3 key to return to DIAGNOSTIC OPERATING
INSTRUCTIONS. Then press the F3 key again to return to the AIX operating
system prompt.
7. Press Ctrl-D to log off from root or superuser.
Chapter 5. Using the Online and Standalone Diagnostics
117