IBM Deskstar Deskstar 3, Руководство пользователя

Страница: 99 / 392

Chapter 8. Coax Configuration
Characters Per Inch (CPI). . . . . . . . . . 89
Lines Per Inch (LPI) . . . . . . . . . . . 90
Single/Double Space . . . . . . . . . . . 90
Maximum Print Position (MPP). . . . . . . . 91
Maximum Page Length (MPL) . . . . . . . . 92
Emulation Mode. . . . . . . . . . . . . 93
Print Quality . . . . . . . . . . . . . . 94
Print Language . . . . . . . . . . . . . 94
Mono/Dual Case . . . . . . . . . . . . 96
Print Text Direction . . . . . . . . . . . . 97
Media Size Priority . . . . . . . . . . . . 97
Screen Buffer Size . . . . . . . . . . . . 98
Printer Compatibility 1 (Carriage Return at MPP +
1).
. . . . . . . . . . . . . . . . . 99
Printer Compatibility 2 (New Line at MPP + 1) . . 100
Printer Compatibility 3 (Form Feed Followed by
Data) .
. . . . . . . . . . . . . . . 101
Printer Compatibility 4 (Form Feed is Last
Character in Print Order)
. . . . . . . . . 101
Printer Compatibility 5 (Null Suppression) . . . 102
Printer Compatibility 6 (Form Feed Command
Position) .
. . . . . . . . . . . . . . 103
Printer Compatibility 7 (Automatic Function After
End of Print Buffer) .
. . . . . . . . . . 104
Printer Compatibility 8 (Automatic Function After
End of OILC Job) .
. . . . . . . . . . . 105
Printer Compatibility 9 (Suppress Timeout on No
Data Loss Intervention Required).
. . . . . . 106
Early Print Complete . . . . . . . . . . . 107
Printer Compatibility 12 (Automatic Function
Before Start of OILC Job)
. . . . . . . . . 107
Form Feed Suppression . . . . . . . . . . 108
Programmed Symbols . . . . . . . . . . 109
Translate Table . . . . . . . . . . . . . 110
Bar Code Mode. . . . . . . . . . . . . 110
Graphics Mode . . . . . . . . . . . . . 111
Alarm Control . . . . . . . . . . . . . 112
Override Host . . . . . . . . . . . . . 112
Using Programmed Symbols (PS) Parameters . . . 113
Plane Selection . . . . . . . . . . . . 113
Full Page On Skip Suppress . . . . . . . 114
PS Print Direction . . . . . . . . . . . 115
This chapter describes the procedures for checking and changing coax
configuration parameters for your 4247 printer. The chapter is divided into sections
according to parameter. Refer to this partial table of contents for parameter and
page listings.
Characters Per Inch (CPI)
You can set the Characters Per Inch (CPI) to any of the following values:
v
10 (Default)
v
12
v
15
v
16.7
Notes:
1. It is possible to specify a CPI value that causes the page width (maximum print
position) to exceed the maximum physical page width. If this occurs, the
printer automatically changes the maximum print position to the highest valid
value for the new CPI setting. See “Maximum Print Position (MPP)” on page 91
for more information.
2. This parameter can be overridden by the computer.
3. Only 10 CPI is valid when either OCR-A or OCR-B is selected as a print
language.
To change or check the CPI value, follow these steps:
1. Press Menu.
2.
Press Scroll
↑
or Scroll
↓
until the printer displays
CONFIGURATION MENU
Coax Configuration
© Copyright IBM Corp. 2002
89