IBM CP20 - Workstation Connection Device KVM, Руководство по установке

Страница: 24 / 56

Adjusting keyboard and mouse sensitivity
The keyboard and mouse sensitivity for the workstation-connection-device interface
may be changed. These changes do not affect the keyboard and mouse sensitivity
once a remote session is started. See the documentation for the operating system
on the host system for information on how to change the keyboard and mouse
sensitivity when connected to the host system.
To change the keyboard sensitivity in the workstation-connection-device interface:
1. Click Options , User Settings , then click the Keyboard tab.
2. Use the mouse to slide the arrow to change the keyboard repeat delay and the
keyboard repeat rate.
3. Click Apply to activate the new setting.
To change the mouse sensitivity in the workstation-connection-device interface:
1. Click Options , then User Settings .
2. Use the mouse to slide the arrow to change the mouse speed.
3. Click Apply to activate the new setting.
Enabling HD audio
Audio is disabled by default. To use HD audio, you must enable it in both the
connection device and the compression card.
1. Turn on the connection device and the host system.
2. On a system (other than the host system to which you are connecting the
connection device) that is on the same subnet as the compression card and
connection device, open a Web browser.
3. Direct the Web browser to the IP address of the connection device. The
connection device Web interface opens.
4. In the connection device Web interface, type your password and click Log In ;
then, click Permissions → Audio
5. Select the check box to enable HD audio.
6. Select the check box to enable audio compression.
7. Click Apply ; then, click Reset .
8. Direct the Web browser to the IP address of the compression card. The
compression card Web interface opens.
9. In the compression card Web interface, type your password and click Log In ,
Permissions ; then, click Audio .
10. Select the check box to enable HD audio.
11. Select the check box to enable audio compression.
12. Click Apply ; then, click Reset .
13. Restart the host system to apply the changes.
14
IBM CP20 Workstation Connection Device: Installation Instructions