IBM CP20 - Workstation Connection Device KVM, Руководство по установке

Страница: 23 / 56

Chapter 4. Using the connection device
Starting a remote session
After the a session has been setup, the workstation connection device is ready to
connect to the host system. For more information on setting up a session, see
Chapter 3, “Setting up the connection between the connection device and the host
system,” on page 9.
Turn on the workstation connection device by pressing the connection device on/off
switch to the on position. Once the IBM workstation connection device boot process
is finished, the workstation interface is displayed. When a network connection has
been established, the network icon in the lower-right corner of the user interface is
displayed without a red X. If the network icon is displayed with a red "X", the
network connection has not been established.
X
For information about solving connection problems, see Chapter 5, “Solving
problems,” on page 15.
Press the remote host system on/off button on the front of the connection device to
turn the host system on or off. To start a session between the connection device
and a host system, click
Connect in the workstation interface. To disconnect the
connection device from the host system, press the disconnect button.
© Copyright IBM Corp. 2008
13