IBM Bridge/ Heritage, Руководство пользователя

Страница: 86 / 167

Heritage Series ADSL Bridge/ Router
7-21
Command Sets for Command Line Interface
been automatically added again, having been discovered by means of
the ARP protocol.)
2. config
Syntax:
config [save]
Description:
Displays the IP configuration (not including the “
snmp
”
configuration), or saves it in flash memory. The functionality of the
“
config
” command is also accessible in the standard way through
the config process (e.g. “
config print ip
”), if that process is
present. However, when accessed through the config process, the
“
snmp
” configuration is included.
Example:
DSL>
ip config
device add ether ether //nice mtu 1500 192.168.2.1
device add vlane ether //lane mtu 1500 192.168.55.1
subnet add vlane.home . 192.168.55.0 ff:ff:ff:00
subnet add ether.home . 192.168.2.0 ff:ff:ff:00
rip send ether 2
rip send vlane 2
rip accept ether 1 2
rip accept vlane 1 2
autoloop on
route add default 0.0.0.0 192.168.2.7 00:00:00:00 2 # MAN
relay ether ether
relay ether vlane
relay vlane vlane
ipatm lifetime 60
# IP host table:
# Port table:
router 520/UDP
snmp 161/UDP
tftp 69/UDP
telnet 23/TCP
DSL>
ip config save
Updating flash filing system ...
done
ip: configuration saved
3. device
Syntax:
device