ENGLISH
7
To use the Plug and Play feature in Microsoft Windows 2000 or Microsoft
Windows Millennium Edition(Me) files should be loaded from the IBM
Monitor CD.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot
into Windows 2000 or Windows Me.
4. Open the
DISPLAY PROPERTIES
window by clicking
START
,
SETTINGS
,
CONTROL PANEL
and then double-clicking the
DISPLAY
icon.
5. Click the
SETTINGS
tab.
6. Click the
ADVANCED
button.
7. Click the
MONITOR
tab.
8. Click the
PROPERTIES
button.
9. Click the
DRIVER
tab.
10.Open the
UPGRADE DEVICE DRIVER WIZARD
window by clicking on
UPDATE
DRIVER
and then Click the
NEXT
button.
11.Select the “Display a list of the known drivers for this device so that I can
choose a specific driver” and then Click the
NEXT
button.
12.Insert the Setup CD into the CD drive : and click the
HAVE DISK
button.
13.Click OK.
14.Ensure that the CD drive letter is selected.
15.Choose IBM T860 monitor and Click OK. The files will be copied from
the CD to your hard disk drive.
16.Close all open windows and remove the CD.
17.Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Driver Installation for Windows 2000 or Windows Me
This section must be
completed before
continuing with the
Windows2000 ,Windows Me
Auto Setup on page 10.
i
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display
quality. IBM recommends
using either 1280 x 1024 at a
refresh rate of 60Hz or 640 x
480 at a refresh rate of 60Hz.
