8
To use the Plug and Play feature in Microsoft Windows XP files should be
loaded from the IBM Monitor CD.
1. Turn off the computer and all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow the system to boot
into Windows XP.
4. Open the
DISPLAY PROPERTIES
window by clicking
START
,
SETTINGS
,
CONTROL PANEL
and then double-clicking the
DISPLAY
icon.
5. Click the
SETTINGS
tab.
6. Click the
ADVANCED
button.
7. Click the
MONITOR
tab.
8. Click the
PROPERTIES
button.
9. Click the
DRIVER
tab.
10.Open the Hardware Update Wizard window by clicking on
UPDATE
DRIVER
and then Click the
NEXT
button.
11.Select the “Install from a list or Specific location(Advanced)” and then
Click the
NEXT
button.
12.Insert the Setup CD into the CD drive : and click the
HAVE DISK
button.
13.Click OK.
14.Ensure that the CD drive letter is selected.
15.Choose IBM T860 monitor and Click OK. The files will be copied from
the CD to your hard disk drive.
16.Close all open windows and remove the CD.
17.Restart the system.
The system will automatically select the maximum refresh rate and
corresponding Color Matching Profiles.
Driver Installation for Windows XP
This section must be
completed before
continuing with the
Windows XP Auto Setup on
page 10.
i
On LCD monitors, unlike
CRTs, a faster refresh rate
does not improve display
quality. IBM recommends
using either 1280 x 1024 at a
refresh rate of 60Hz or 640 x
480 at a refresh rate of 60Hz.
