IBM 9306, Руководство по техническому обслуживанию аппаратной части

Страница: 29 / 244

Note: The illustrations in this procedure are of a NetBAY42 rack cabinet. The same
procedure applies to the NetBAY25 rack cabinet.
1. Remove the door according to “Removing and installing a NetBAY42 door” on
page 18 or “Removing and installing a NetBAY25 door” on page 17.
2. Remove the top and bottom hinge pins from the rack cabinet; then, install the
hinge pins on the other side of the rack cabinet.
3. Remove the front door latch and attach it to the other side of the rack cabinet.
Note: The rear door latch is built-in to both rear filler panels, so there is nothing
to move when reversing the rear door on the rack cabinet.
Figure 14. Moving the hinge pins and front door latch
Type 9306 Model 250/420/421
19