IBM 9306 Скачать руководство пользователя страница 27

Страница: 27 / 244

Removing and installing rack doors

Remove the rack doors when installing and removing options in the rack cabinet. All
rack cabinets come with front and rear doors installed.

Note:

You only need to remove a door if part of the rack cabinet is obstructed by
the door as you install the optional device.

Removing and installing a NetBAY25 door:

Use the following procedure to

remove a front or rear door from the rack cabinet:

1. Unlock and open the door.

2. Grasp the door firmly with both hands and lift it upward and away from the

hinges; then, set the door aside.

Reverse this procedure to install the door on the rack cabinet.

Figure 12. Removing a front door from the NetBAY25 rack cabinet

Type 9306 Model 250/420/421

Содержание 9306





















































































































































































































































Результаты поиска

Содержание 9306

Отзывы:

Похожие инструкции для 9306

Бренды по названию

Популярные бренды

IBM 9306, Руководство по техническому обслуживанию аппаратной части

Результаты поиска

Содержание 9306

Отзывы:

Похожие инструкции для 9306

Бренды по названию

Популярные бренды