IBM 9306, Руководство по техническому обслуживанию аппаратной части

Страница: 171 / 244

3. Push the two Rack PDUs together, aligning the holes on the dual-device
attachment brackets; then, use four M6 screws to secure the front
1
and rear
2
of the brackets to each other.
4. Install a horizontal mounting bracket
4
on the Rack PDU on the right with two
M3x5 screws
3
; then, install the other horizontal mounting bracket
7
on the
Rack PDU on the left with two M3x5 screws
8
.
Note: There are two sets of mounting holes on the brackets. You can align the
Rack PDU to be even with the back of the rack cabinet or recessed
inside, depending on how you install the brackets.
5. Determine the U level within your rack cabinet where you are going to install the
Rack PDUs; then, install both Flat Panel Monitor Rack Mount Kits
2
in the
rear of the rack cabinet with four M6 screws and clip nuts or cage nuts (two
screws and nuts per bracket).
Figure 67. Installing the mounting brackets for two devices
Installing Optional Devices
161