IBM 8841 - eServer xSeries 236, Руководство по установке опций

Страница: 49 / 74

Complete the following steps to install a microprocessor:
1. Read the safety information beginning on page v and “Installation guidelines” on
page 11.
2. Turn off the server and peripheral devices, and disconnect the power cords and
all external cables. Remove the cover and air-baffle assembly.
Attention: When you handle static-sensitive devices, take precautions to
avoid damage from static electricity. For details about handling these devices,
see “Handling static-sensitive devices” on page 12.
3. Remove the microprocessor baffle and protective film from the second
microprocessor socket.
Heatsink 2
Microprocessor 2 VRM
Microprocessor 2
Microprocessor
baffle
Microprocessor
release lever
4. Install a VRM in the VRM connector.
a. Center the VRM over the connector. Make sure that the VRM is oriented
and aligned correctly.
b. Carefully but firmly push down the VRM to seat the VRM in the connector.
c. Make sure that the VRM clips on both sides of the VRM connector lock.
Chapter 2. Installing options
37