IBM 8668 - Eserver xSeries 232, Руководство по техническому обслуживанию аппаратной части

Страница: 40 / 182

– Try network only
– Try local drives only
– Try network first, then local drives
Note: This option is not supported on this product. To change the boot order,
use the Configuration/Setup Utility program. See, “Using the
Configuration/Setup Utility program” on page 24 for more information.
v
Show setup prompt
Select this choice to either display the PXE setup prompt or disable it. The default
setting is Disabled.
When this choice is enabled. Press Ctrl+S to enter the setup menu appears on the
screen under the initializing prompt.
v
Setup time wait menu
Select this choice to set the amount of time (in seconds) that the system will
pause during initialization for a Ctrl+S input.
– 2 seconds (default)
– 3 seconds
– 5 seconds
– 8 seconds
v
Legacy OS Wake up support
Select this choice to allow or disallow a non-Windows operating system to use
adapter remote wake-up capability.
v
Disabled (default)
v
Enabled
Notes:
1. Use the default setting for Advanced Configuration and Power Interface (ACPI)
aware operating systems, such as Windows 2000 and Windows NT.
2. If your server is running a non-ACPI operating system, you must set this
selection to enable to use the Wake on LAN support.
3. When using a non-ACPI operating system, do not send a wake-up packet to
the server while it is turned on. If a wake-up packet has been sent while the
server is on and you are unable to turn the server off, see “Turning off the
server” on page 9. information.
Using the SCSISelect utility program
32
Hardware Maintenance Manual: Type 8668